NBSP2 Cantilever Corner Mount
- This full motion cantilever mount can be used anywhere but its "Z" arm design makes it prefect for corner installs
- It extends from 94mm to 700mm off the wall .
- Near 180 degrees of motion.
- As standard, Vesa 100 and Vesa 200 mounting hole patterns are supported.
- Add the UL400 adapter plate if 400mm x 300mm support is required (Most Panasonics up to 50").
- Add the UA800 adapter arms for panels with mounting holes up to 800mm x 500mm
- This mount includes hardware for mounting to concrete, solid block, or wooden studs and a selection of screws to fit most TVs.
- See the attached brochures for installation examples
This mount has the following features
- Fits most 32"-57" flat panels
- 180 degrees swing
- -5/+15 degrees tilt
- +/- 4 degrees rotation
- Vesa compliance
- 100mm x 100mm
- 200mm x 200mm
- 300mm x 300mm (with optional UL400)
- 300mm x 400mm (with optional UL400)
- 400mm x 400mm (with optional UL400)
- Up to 800mm x 500mm (with optional UA800)
- Maximum weight 68kg
Manuals
 |
NB-SP2 Mount |
| NBSP2 Swing Arm Mount | |
|
NB-SP2 with UL400 Adapter |
| NBSP2 adapter plate options and installation examples |
Write Your Own Review
Additional Information
| SKU | NBSP2 |
|---|---|
| Mount Type | Cantilever Mount |
| Suggested Size Range | 32"-57" |
| Vesa Sizes Supported | Vesa 100, Vesa 200 |
| Maximum Weight | 68kg |
| Distance off Wall | 94mm to 700mm |
| Range of Motion | Near 180 degrees swing, -5 / +15 degrees tilt, +/- 4 degrees rotation |
| Notes | Use UL400 or UA800 adapter plate to fit most sizes of TV |
Related Products
Check items to add to the cart or select all
My Cart
You have no items in your shopping cart.
NZ Owned
Newsletter
Compare Products
You have no items to compare.
