Matrix Switch 4x4 - 50m Over Cat 6
Enables up to 4 hdmi audio/video devices to be independently switched to up to 8 displays.
Each output is HDMI over Cat 6 and HDMI. Both are active at once allowing up to 8 screens to be driven.
This device has the following features:
- 4 HDMI Inputs
- 4 Dual HDMI / HDMI over single cat 6 ouputs.
- Cat 6 receivers are slim line model.
- HDMI cable is good up to 15m
- HDMI over Cat 6 is good up to 50m.
- EDID control via dip switch.
- HDMI 1.4 video features supported inc. 3D & future-ready for 4K
- All uncompressed audio inc. Dolby TrueHD and DTS-HD Master Audio
- EDID discovery & HDCP pass through
- Electrostatic discharge (ESD) protection
- Matrix can be controlled via IR remote , IP or RS-232
- HDMI over cat 6 receivers route HDMI and IR
- IR signals are routed from display to selected source.
- Cat 6 receivers are powered from the matrix. No additional power supplies are required.
- Matrix Unit - 1U form factor
- Mounting ears for 19" rack
- 12V/2.5A power supply
- Remote control
- 4 x IR transmitter
- 5 x IR receiver
- 4 x HDMI over Cat 6 receivers