NBSP2 Cantilever Corner Mount
- This full motion cantilever mount can be used anywhere but its "Z" arm design makes it prefect for corner installs
- It extends from 110mm to 712mm off the wall .
- Near 180 degrees of motion.
- As standard, Vesa sizes from 100 to 400 are supported.
- The included mounting arms can accomodate up to 650mm x 400mm.
- The optional UL400 adapter plate can be used instead of the arms for Vesa 300 and 400 (if a smaller plate is required).
- This mount includes hardware for mounting to concrete, solid block, or wooden studs and a selection of screws to fit most TVs.
- See the attached brochures for installation examples
- Fits most 40"-60" flat panels
- 180 degrees swing
- -5/+15 degrees tilt
- +/- 4 degrees rotation
- Vesa compliance
- Vesa 100, 200, 300, 400, up to 650 x 400.
- Wall plate is 480mm x 200mm.
- Maximum weight 68kg
|Mount Type||Cantilever Mount|
|Suggested Size Range||40"-60"|
|Vesa Sizes Supported||Vesa 100, 200, 300, 400, up to 650mm x 400mm|
|Distance off Wall||110mm to 712mm|
|Range of Motion||Near 180 degrees swing, -5 / +15 degrees tilt, +/- 4 degrees rotation|
|Notes||Use UL400 for a neater 300x300 or 400x400 install|